Downloads Custom Software Calculators Field Supplies About Contact Sign in

FOR CONSTRUCTION. BY CONSTRUCTION.

009 · KING STUDS · FREE

KING
STUDS

Pick the architect's linked model, choose the walls, click MODEL STUDS: each qualifying door, window and wall opening gets king and jack studs at both jambs — jacks from the floor to the head, kings to the underside of the floor above. Real Revit families, cold-formed steel or wood, sized to each wall's core.

Version 1.0.0 · Revit 2023–2027 · Free — sign in with a free Fulcrum account

Work email in, ZIP out — no account to download. Prefer an installer? Get the code-signed .exe. Every build’s SHA-256 is published.

Prefer to read first? Grab the how-to guide (PDF).

Doors · windows · wall openings Reads a linked model Jacks to the head, kings to the deck SSMA steel or 2x wood Isolated view for NWC
SHEET 01 · WHAT IT DOESLINK · CLICK · FRAMEDREV A
What it does

Openings, framed at both jambs.

Choose the model the openings come from, choose the walls, click MODEL STUDS. Each qualifying door, window and wall opening gets its king and jack studs — in your model, not the architect's.

KING STUDS — REVIT
A sample Level 2 fit-out: pick the linked model and Level 2, click MODEL STUDS — 56 studs at 12 openings and a 3D view of only the studs, ready for NWC export; then a closer look at the 8'-0" opening.
  • Openings come from a loaded linked Revit model or from the current model — the link is only read
  • Doors, windows and rectangular wall openings; anything narrower than a minimum width (2'-0" by default) is skipped
  • Studs are real loadable families, Structural Framing by default, each tagged King or Jack with its opening, size and material
  • An optional 3D view, “Fulcrum - King Studs”, shows only the new studs, ready to export to NWC
SHEET 02 · HOW IT WORKSSOURCE · WALLS · RULEREV A
How it works

One dialog, top to bottom.

Click King Studs on the Fulcrum VDC tab, in the Modeling panel. The options open every time, and nothing in the model changes until you click MODEL STUDS.

01

Openings from

Host model (this document), or any loaded Revit link, listed by its instance name. Unloaded links aren't offered.

02

Walls

Current selection frames the walls you selected in your model — it can't be chosen when none are. All walls + filters takes every wall, narrowed by interior or exterior, level and wall type. With a link, use All walls + filters: linked walls can't be selected one by one.

03

Opening types and minimum width

Doors, Windows and Wall openings, all on by default. Openings narrower than the minimum rough width — 2'-0" to start — are skipped, like small windows. Type it in your project's units — in a feet-and-inches project, 2'-0", 24", or 2 (feet).

04

What the studs are

Target category: Structural Framing, Structural Columns or Generic Models. Material: Auto-detect (metal if ambiguous), Force metal (CFS) or Force wood. For metal, the flange (1.625" to start), the gauge — 20, 18, 16, 14 or 12 ga, 18 by default — and web knockouts, on by default.

05

The jamb rule

Below the width threshold (6'-0" to start): 1 king and 1 jack per side. At or above it: 2 and 2. All four counts are editable, and Box the jamb doubles every king and jack.

06

Elevation and output

Ignore slab thickness runs kings level to level; a finish-floor offset, in inches, raises every base. Keep “Build isolated 3D view” ticked for the NWC view. Then MODEL STUDS — a results window counts the kings and jacks it placed.

SHEET 03 · WHAT YOU'LL SEEILLUSTRATEDREV A
Dialog · results · close-up

What you'll see.

KING STUDS — OPTIONS
Illustration of the King Studs options dialog: openings from a linked model, All walls + filters with Level 2 chosen, doors, windows and wall openings ticked with a 2'-0" minimum width, then the stud settings — code standard and target category, with a note that the code standard doesn't change the stud counts, material, metal flange and gauge, web knockouts, the jamb rule with its 6'-0" threshold and king and jack counts, the elevation options and the isolated 3D view for NWC export
Illustration of the options dialog — openings source, walls and filters, stud settings, the jamb rule and the NWC view
RESULTS
Illustration of the King Studs results window: framed 56 studs at 12 openings — 28 kings, 28 jacks, 56 total studs — with an estimate of the time saved and a note about the isolated view for NWC export
Illustration of the results window — kings, jacks and total studs for the sample run, with the time-saved estimate
CLOSE-UP
Illustration of a close-up of one side of an 8-foot wall opening in a sample steel stud wall: two jacks stop at the opening's 8'-0" head, two kings run on up to the underside of the floor above, the jack's web shows knockout holes, and a plan inset shows the four C-shaped studs, a jack and a king facing each other
Illustration of the 8'-0" opening in the sample model — two jacks to the head, two kings to the underside of Level 3, web knockouts on the steel studs
SHEET 04 · THE DETAILSHEIGHTS · SIZES · LIMITSREV A
The details

Where each stud goes, and how tall.

  • Jacks to the head. A jack runs from the floor to the head of its opening — a door or window's Head Height, or the top of the opening. Door studs start at the door's own sill, so doors on intermediate floors frame correctly; window and wall-opening studs start at the level below them, at the floor rather than the sill.
  • Kings to the deck. A king runs on past the head to the underside of the largest floor on the next level above, or the underside of a roof. The next level is the first level of any kind above the head, so a ceiling or reference level there stops the king; if that level has no floor or roof, the king stops a typical floor thickness below it. Floors and roofs are read from the model the openings come from. Tick Ignore slab thickness to run kings level to level. A height that looks impossible is clamped, and the results name the opening.
  • Nested at the jamb. The innermost jack's inner face is flush with the opening, and every other stud sits tight against the one before it, working outboard — jacks first, then kings — the same on both sides. At each jamb the jacks open away from the opening and the kings toward it, so a jack and a king face each other.
  • Sized to the wall. The stud depth comes from the wall's core thickness, snapped to a standard SSMA steel depth (2-1/2" to 12") or nominal lumber (2x4 to 2x12). A core more than 1/8" off a standard depth is still framed and flagged. Openings in a wall whose core isn't a stud depth at all are skipped, and the results count them.
  • Metal or wood. Auto-detect reads the wall type's name and its materials — a size such as 600S162 or 2x6, or words like steel or wood — then the core thickness. An ambiguous wall is framed in metal. Force metal or wood for the whole run.
  • Real families. Each stud is a loadable family built at run time from Revit's own family template: a lipped-C section with rolled corners for steel, a plain rectangle for wood. Families are named “Fulcrum Stud” plus the size and category, such as Fulcrum Stud 600S162-43 SF, and reused on later runs. Revit's family templates must be installed.
  • Knockouts. With Model web knockouts on (the default), steel studs get standard 1-1/2" × 4" web knockouts at 24" on center, centered along the stud, with each hole's center at least 12" from the end. They're standard dimensions, not a particular manufacturer's. Studs shorter than 24" get none, and on a very large run — more than 40 different stud lengths — knockouts are skipped and plain studs are modeled; the results say so.
  • Tagged for schedules and Navisworks. Every stud carries four text parameters under Identity Data: FUL Stud Role (King or Jack), FUL Opening Id, FUL Stud Size and FUL Material.
  • Your model only. The studs are placed in your model; the linked model is only read, and nothing is moved. If nothing qualifies, nothing changes, and it tells you what to check.
  • Kings and jacks only. No headers, sills, cripples, track or plates, field studs or blocking. Curved walls are skipped and counted. Wall openings means openings made with Revit's rectangular Wall Opening tool.
  • Counts, not code. The width threshold and the counts you set decide the studs; the Code standard setting doesn't change them. King Studs doesn't size studs for loads or check them against a code.
  • Running it again. A second run over the same openings adds a second set — earlier studs aren't detected or replaced. Delete them first (select by the family name, Fulcrum Stud, or the FUL Stud Role parameter), and run from a view other than “Fulcrum - King Studs”, which is rebuilt on each run that builds the view.
SHEET 05 · INSTALLNO ADMINREV A
Requirements & install

Per-user install. No admin rights.

  • Autodesk Revit 2023, 2024, 2025, 2026 or 2027 on Windows.
  • A free Fulcrum account. Sign in inside Revit: Fulcrum VDC tab → Account / About → Sign In — or just click King Studs, which opens the sign-in window if you aren't signed in. No trial, no card. Create the account at hub.fulcrumvdc.com.
  • An internet connection when you use it. Each run checks your free license with Fulcrum Hub; offline, it won't run.
  • Revit's family templates. The stud families are built from them, so they must be installed. If none can be found, King Studs says so and points you to Options ▸ File Locations ▸ Family Template Files.
  • Close Revit first. If the installer says Revit is open, close Revit fully and re-run it.
  • First start: Always Load. Revit may ask once whether to load an add-in signed by FULCRUM VDC, LLC — click Always Load, and it won't ask again for Fulcrum tools. (Do Not Load skips it, and the Fulcrum VDC tab won't appear.)
  • Installs only this tool. King Studs plus the Account / About button — no other Fulcrum apps.
  • ZIP or .exe. The installer ZIP is the primary download; a code-signed .exe is also available.
  • Uninstall. Run the installer again → Uninstall, or run UNINSTALL.cmd from the ZIP.

Button missing after install? If you clicked Do Not Load when Revit asked about the add-in, restart Revit and choose Always Load. With the .exe, make sure your Revit version was ticked. With the ZIP, close Revit, run INSTALL.cmd again and check that the “Installed for:” line lists your version. Then restart Revit. Every run writes a diagnostic log to %APPDATA%\Fulcrum\kingstuds-debug.txt. Still stuck? Send us a message.

SHEET 06 · FAQSTRAIGHT ANSWERSREV A
FAQ

Questions, answered.

Does it work with a linked architectural model?

Yes — that's what it's built for. Pick a loaded link under Openings from: its doors, windows and wall openings are read, and the studs are placed in your model. The link is only read, and unloaded links aren't listed. With a link, use All walls + filters — linked walls can't be selected one by one.

How tall are the kings and jacks?

Jacks run from the floor to the head of the opening. Kings run past the head to the underside of the largest floor on the next level above (or the underside of a roof), read from the model the openings come from. The next level is the first level of any kind above the head, so a ceiling or reference level there stops the king; if that level has no floor or roof, the king stops a typical floor thickness below it. Tick Ignore slab thickness to run them level to level. Door studs start at the door's own sill; window and wall-opening studs start at the level below them. A finish-floor offset, in inches, raises every stud's base.

How many studs does each opening get?

Below the width threshold (6'-0" by default): one king and one jack per side. At or above it: two and two. All four counts are editable, and Box the jamb doubles every king and jack. The Code standard setting doesn't change the counts.

What sizes does it use?

The stud depth follows the wall's core thickness, snapped to a standard SSMA steel depth (2-1/2" to 12") or nominal lumber (2x4 to 2x12). Metal studs use the flange and gauge you set — 1-5/8" and 18 ga by default; flanges snap to 1-3/8", 1-5/8", 2", 2-1/2" or 3", and gauges run from 20 to 12 ga. Metal or wood is detected from the wall type's name, its materials and the core; ambiguous walls get metal, or you can force either.

Does it model headers, sills or track?

No. It models king and jack studs only — no headers, sills, cripples, track or plates, field studs or blocking. Curved walls are skipped, and the results say how many.

What happens if I run it again?

It adds another set. Studs from earlier runs aren't detected or replaced, and nothing keeps the studs in step with the linked model. Delete the old studs first — select them by their family name, Fulcrum Stud, or by the FUL Stud Role parameter — and run it from a view other than Fulcrum - King Studs, which is rebuilt on each run that builds the view.

Which Revit versions are supported?

Revit 2023, 2024, 2025, 2026 and 2027, on Windows.

Is it free? Do I need an account?

It's free. You need a free Fulcrum account and sign in inside Revit: Fulcrum VDC tab → Account / About → Sign In. No trial, no card. It needs an internet connection when you use it — each run checks your free license with Fulcrum Hub.

SmartScreen warned me about the download.

The .exe is code-signed as Fulcrum VDC, LLC, so Windows names us as the publisher instead of showing “Unknown Publisher.” SmartScreen can still flag a brand-new build until enough people have downloaded it — choose More info → Run anyway. Confirm the signature under Properties → Digital Signatures.

SHEET 07 · RELEASE NOTESREV 1.0.0REV A
Release notes · 2026-09-29

1.0.0 — first public release.

Every tool's full revision history lives in the changelog.

  • King Studs button on the Fulcrum VDC tab, in the Modeling panel.
  • Openings from the current model or any loaded Revit link: doors, windows and rectangular wall openings, at or above a minimum width.
  • Walls from your selection, or all walls filtered by interior or exterior, level and wall type.
  • Jacks to the head, kings to the underside of the floor or roof above; an editable width threshold and counts; Box the jamb.
  • SSMA cold-formed steel (lipped C, 20–12 ga, optional web knockouts) or dimensional lumber, sized to the wall core; metal or wood auto-detected.
  • Studs as loadable families in Structural Framing, Structural Columns or Generic Models, with King/Jack, opening, size and material parameters.
  • An optional isolated 3D view, “Fulcrum - King Studs”, for NWC export, and a results window with the counts and an estimate of the time saved.
  • Revit 2023–2027. Free with a Fulcrum account; needs an internet connection when you use it.
Free download

Frame the openings.

Kings and jacks at doors, windows and wall openings — read from the architect's model, placed in yours.

Download free

Autodesk and Revit are trademarks of Autodesk, Inc. Fulcrum VDC, LLC is not affiliated with or endorsed by Autodesk.